Typical Properties
FAA PMA Products
|
P/N |
UNCURED Viscosity cps |
Work Time mins.@R.T. |
Tack Free Time mins.@R.T. |
Specific Gravity |
CURED Durometer SHORE A |
Tensile PSI |
Elongation % |
Peel Strength lbs/in |
Max Continuous Operating Temp |
| AS106 | 500,000 | 4 | 12 | 1.08 | 32 | 500 | 500 | 25 | 260C 500F |
| AS157 | 500,000 | 4 | 20 | 1.12 | 38 | 750 | 850 | 50 | 250C 482F |
| AS159 | 500,000 | 4 | 15 | 1.14 | 38 | 700 | 750 | 50 | 260C 500F |
| AS3145 | 500,000 | 8 | 15 | 1.12 | 50 | 900 | 800 | 100 | 260C 500F |
| AS3145P | 500,000 | 8 | 20 | 1.13 | 50 | 700 | 750 | 100 | 260C 500F |
Non FAA PMA Products
Industrial Bonding
|
P/N |
UNCURED Viscosity cps |
Work Time mins.@R.T. |
Tack Free Time mins.@R.T. |
Specific Gravity |
CURED Durometer SHORE A |
Tensile PSI |
Elongation % |
Peel Strength PPI |
Max Continuous Operating Temp |
| AS11 | 250,000 | 4 | 25 | 1.08 | 30 | 400 | 650 | 30/25 (Al/St lb/in) | 260C 500F |
| AS11-NC | 400,000 | 5 | 15 | 1.29 | 35 | 275 | 350 | 30 | 260C 500F |
Self-Leveling Coating
|
P/N |
UNCURED Viscosity cps |
Work Time mins.@R.T. |
Tack Free Time mins.@R.T. |
Specific Gravity |
CURED Durometer SHORE A |
Dielectric Strength kv/mm |
Dielectric Constant |
Dissipation Factor |
Volume Resistivity |
| AS12SL | 30,000 - 40,000 | 8 | 14 | 1.03 | 25 | ||||
| AS12SL-NC | 25,000 - 35,000 | 10 | 20 | 1.03 | 25 | 20 | 3.1 | 0.01 | 4 x 10^15 |
| AS-RTV-SL | 10,000 | 10 | 20 | 1.01 | 15 | 20 | 3.1 | 0.01 | 4 x 10^15 |